Engineering Calculator

TV & Electronics Power Calculator

Calculate TV, set-top box and router monthly electricity consumption.

📺

TV & Standby Load

Include TV, set-top box and router standby consumption.

Live calculator

Input Details

Fill what you know. If a value is unknown, keep the practical default and verify the nameplate later.

How much electricity does a TV use?

Short answer: A modern LED TV uses about 30–50 W (32 inch), 60–90 W (43 inch) or 90–150 W (55 inch). Watching 5 hours a day, a 43 inch TV uses about 9–14 kWh a month. A set-top box and Wi-Fi router left on 24×7 add another 10–20 kWh a month.

TV and electronics consumption
DeviceTypical wattskWh/month
32" LED TV (5 h/day)30–50 W4.5–7.5
43" LED TV (5 h/day)60–90 W9–13.5
55" LED/QLED TV (5 h/day)90–150 W13.5–22.5
Set-top box (24×7)10–20 W7–14
Wi-Fi router (24×7)6–12 W4–9
TV standby0.5–1 W0.4–0.7

Tip: Switching the set-top box off at the plug overnight saves more than the TV's own standby.

Using this calculator outside India? Outside India? Pick your currency at the top of the page and enter the per-kWh rate printed on your bill. Typical residential averages: USA 18.3¢/kWh (EIA, July 2026; California 33.6¢, Texas 15.9¢), UK about £0.25/kWh, Germany about €0.38/kWh, UAE about AED 0.23–0.38/kWh, Canada about C$0.13–0.20/kWh and Australia about A$0.30–0.35/kWh. The kWh result is the same in every country; only the cost changes.

How to use this result

Use this page to include TV runtime plus the hidden 24×7 load from set-top box, router and similar electronics.

This is a preliminary planning estimate. For certified audits, use site measurement and nameplate readings.

FAQ

Does a TV use electricity when switched off with the remote?
Yes, a small standby load of about 0.5–1 W for modern TVs. The set-top box is usually the bigger standby load at 10–20 W.
Is this result exact?
It is an engineering estimate using user inputs. Exact result needs actual meter/nameplate data.
Can I use it for audit report?
Yes, as a preliminary calculation and supporting estimate.

Standby tip

The TV may not be the only load. Set-top boxes, routers and sound systems can add 24×7 standby units.

Accuracy note

The result is a planning estimate. Use nameplate wattage, measured runtime and current tariff for professional-level accuracy.