Engineering Calculator

LED Light Savings Calculator

Calculate saving when replacing tube lights or old bulbs with LED lights.

💡

LED Savings Check

Compare old lighting with LED upgrade and payback.

Live calculator

Input Details

Fill what you know. If a value is unknown, keep the practical default and verify the nameplate later.

How much electricity do LED lights save?

Short answer: An LED uses about 80–85% less power than an incandescent bulb and about 50% less than a fluorescent tube for the same light. Replacing a 60 W bulb with a 9 W LED used 6 hours a day saves about 9 kWh a month per bulb, so the LED pays back within a few months.

LED replacement savings (6 h/day)
Old light → LEDWatts savedkWh saved/month
60 W incandescent → 9 W LED51 W9.2
40 W tube light (+choke) → 20 W LED tube~30 W5.4
15 W CFL → 9 W LED6 W1.1
100 W halogen flood → 20 W LED80 W14.4

Tip: Compare bulbs by lumens, not watts: about 800 lumens replaces an old 60 W bulb.

Using this calculator outside India? Outside India? Pick your currency at the top of the page and enter the per-kWh rate printed on your bill. Typical residential averages: USA 18.3¢/kWh (EIA, July 2026; California 33.6¢, Texas 15.9¢), UK about £0.25/kWh, Germany about €0.38/kWh, UAE about AED 0.23–0.38/kWh, Canada about C$0.13–0.20/kWh and Australia about A$0.30–0.35/kWh. The kWh result is the same in every country; only the cost changes.

How to use this result

Use this page to compare old lamps with LED lighting and check whether the replacement cost comes back quickly.

This is a preliminary planning estimate. For certified audits, use site measurement and nameplate readings.

FAQ

How many watts LED equals a 60 W bulb?
About 8–10 W LED (roughly 800 lumens) gives the same light as a 60 W incandescent bulb.
Is this result exact?
It is an engineering estimate using user inputs. Exact result needs actual meter/nameplate data.
Can I use it for audit report?
Yes, as a preliminary calculation and supporting estimate.

Lighting tip

LED upgrade is usually a fast-payback action when old bulbs run for many hours daily.

Accuracy note

The result is a planning estimate. Use nameplate wattage, measured runtime and current tariff for professional-level accuracy.